Login to enter your own
review of this item.
Center total is the Seller's overall score, averaged from each active component:
Atomic Mall Feedback: Imported Feedback: Order Fulfillment Rate: |
100.0 99.8 100 | |
Trophies Earned |
MORE Gas springs listed in our Store Fully extended= 20 inches ... Fully retracted = 12 inches (center to center of the ball socket)
Diameter: rod = 10 mm / tube = 22mm
190 pound force at rest (full extension)
10MM metal ball joints on both rod and tube end
You are buying (1ea) gas spring / shock / strut Manufactured by Columbia Strut (model CS2000-190 / SP-1125300)
This unit comes complete with threaded removable 10mm STEEL ball sockets both on the rod and tube ends along with removable 10MM 5/16 thread ball studs and clips
The shipping, handling and insurance is a set cost of $12.00 (FedEx shipping to the Lower 48 states USA ONLY) Shipping and Handling to all other parts of the world please e-mail us for a price quote and to be sure we can ship to your location.
Note: for best results replace both struts (when 2 struts are used)
ALWAYS install with rod down (your struts will last much longer here's the reason all struts contain a bit of oil / that is what causes the damping effect towards the end of the stroke , this oil also lubricates the piston, installing the rod down keeps the oil atop the piston!)
Weather you are looking for a replacement, upgrade or thinking of adding a gas spring to anything you would like assisted power in opening - closing or to be held open hands free this may be for you. Gas springs offer a unique alternative to conventional mechanical, coil spring or counterbalancing devices. The spring rate for a gas cylinder is far less than for any type of mechanical spring. The advantages of these springs involve the combination of a relatively flat force curve, versatility of controlled forces, extension speed, damping at the end of the stroke along with a very compact design. Each gas spring contains a specific amount of oil, which lubricates the seal, piston and piston rod, as well as acting as a damping medium. The oil within the cylinder, when it is compressed or extended, moves from one side of the piston head to the other, providing a damping effect.
If you do not find the size, length or configuration you are in need of please e-mail us as we have over 100 combinations to choose from
Thank-you for your interest
Watch for MORE items from RV-Trader to come!