Sensoray Model 2601 I/O via Ethernet System hub, 4 serial interlock Com ModuleWe Gladly Ship Worldwide*!
Sensoray Model 2601 Modular I/O via Ethernet Smart Module

This is a communication hub for the 2600 series of I/O modules. It employs a standard Ethernet interface, enabling simultaneous access to the I/O system from up to four network clients. An embedded, high performance UDP/IP stack works together with a lightweight error recovery protocol to guarantee reliable packet delivery without the overhead of TCP. The embedded real-time operating system and application firmware boots up in approximately one second.
Up to sixteen I/O modules, in any combination of types, may be connected to the 2601. When multiple I/O modules are connected to a 2601, it is possible for hundreds of I/O points to be monitored and controlled through a single Ethernet connection. Larger data acquisition and control systems can be built using several 2601 modules and an Ethernet switch.
Low-cost, optically isolated data links are used to communicate with I/O modules. This reduces cost by making it unnecessary for each I/O module to have an expensive Ethernet circuit. Optical isolation helps to eliminate problematic ground loops that can diminish operational reliability and cause equipment damage. Serial PortsFour general-purpose serial ports are provided to enable network clients to monitor and control remote serial devices over an Ethernet. Each port is independently configurable for RS-232, RS-422 or RS-485 operation. Standard baud rates up to 115.2 Kbps are supported. These ports are useful for communicating with bar code scanners, motor controllers and other remotely located serial devices.
InterlocksIntegral support is provided for up to five independent interlock or emergency stop circuits. An innovative routing system allows these circuits to be directly connected to the 2601, which in turn distributes the interlock signals directly to its I/O modules. This makes it possible to implement fail-safe interlock operation without the extra costs (e.g., complex wiring, external terminal blocks) that are typically associated with interlock circuits. In addition to routing the interlock signals, the 2601 also monitors the interlock signals and reports their states to Ethernet clients on demand.
Low-cost cablesEach I/O module connects to the 2601 with a standard Category-5 patch cable. This cable delivers power to the I/O module and it carries the optically-isolated communications between the 2601 and I/O module. Some I/O module types, such as the 2652 Solid State Relay module, also require a daisy-chain power cable (Sensoray part number 2600C1) for interlock circuit connections.
I/O ModulesA wide range of I/O module types are available. Each I/O module type has a specialized function such as analog I/O, thermocouples, relays, digital I/O, etc. A low-cost category-5 patch cable connects each I/O module to its Communication Module. Any combination of I/O modules may be connected to a Communication Module.
All I/O modules have on-board DC/DC converters to power module circuitry. This feature helps to prevent ground loops and associated common mode voltage problems when the I/O modules are distributed over long distances. In addition, the inter-module communication circuits are optically isolated so as to eliminate communication ground loops.
Features

• 100/10 Mbps Ethernet gateway to 2600 series I/O modules
• Four RS-232/422/485 ports for remote serial devices
• Integral support for interlock and emergency stop circuits
• Network watchdog shuts off I/O upon client fault
• High-performance network stack: up to 1000 transactions/second
• Ultra-fast, one second boot-up time
• Optically isolated serial communication to I/O modules
• Watchdog Timer
• CE Compliant
• Compatible with Linux and Windows

For more information, click here to view the datasheet
Item is new/unused from surplus inventory.
Don't forget to place your bid.

By bidding on this auction you agree to the following terms:
Shipping Terms:

• Buyer pays all shipping costs.
• Let us know if there is an issue with the shipping costs, as they are automatically calculated by Atomic Mall.
• Shipments made to California must include 8.75% sales tax unless we are provided with a valid resale certificate.
• We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller.
• The Parcel post option is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required.

Payment Terms:

• Payment is to be made by PayPal
• Please contact us if you have any questions about Atomic Mall's recent payment policy change.
• Payment is to be received within ten days of close of auction.
• Should payment not be received within ten days the item will be re-listed and high bidder will forfeit.

International Terms: (These terms only apply to international shipments.)

• Buyer is responsible for all brokerage, customs, and or duty charges.
• *Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.
• Payment must be made in US Dollars.
• Money must be drawn against a US bank.

Warranty Terms:

• No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in auction.
• What you see in the picture(s) is what you get nothing more nothing less.
• Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad.
• Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/KSU/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for.
• Our only guarantee is that you will receive the make and model listed in the ad.
• The maximum liability of Parts or repair(the seller) is the high bid of the auction.
• When a states "Item sold for parts or repair only", These items are broken, damaged, non-functional, and or non-working. By bidding buyer acknowledges and agrees that he/she knows that the item being bought is a non-working and or broken item. Buyer fully understands that the item is broken and that he/she has the ability and desire to fix the item. We only recommend bidding if you are skilled in the repair of the item. We disclose all information we are able to get from testing the unit although the faults that we find may not be all inclusive. We obviously can not test a drum in a printer when the power supply has gone out. There may be more or less problems then we list, but we will list all we observe.

Return Terms:

• Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Parts or Repair reserves the right to replace the item(s) or refund the high bid solely at our discretion. Item must be returned in the original box and packaging.
• Bidder must request a RMA number before returning item(s).
• Packages returned without a RMA number will become property of 'Parts or repair" (the seller) ten days after receipt unless buyer has paid return shipping within the ten day period.

Shipping Damage Terms:

• Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, in most cases at our discretion.
• Not retaining the original box and packaging may affect the carriers decision on a claim.
• Seller will commence filing the claim once buyer has filed the damage report with the seller.
• Buyer must notify seller within 48 hours of receipt of a damaged shipment.

Medical Terms:

• The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that Atomic Mall deems these terms are applicable to:
• The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you cannot bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
• The buyer will not hold the seller, Atomic Mall or the item's manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device.
• Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into service. Joel Rydell in San Diego, CA, USA Online Business name: Parts Or Repair

Software Terms:(applies only to software sales)

• NOTE: in accordance with Atomic Mall and Microsoft policies regarding the sale of OEM software, an accompanying piece of hardware will be included in the sale.

If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect.
Copyright 2011 Parts Or Repair - All Rights Reserved.