I'm Offline. Message Me!
product Wizard 2000 Listing Template - AW2KLOT#:14345Emerson / Motorola cPCI-6020 Compact PCI Host Slot Processor Board 01-W3938F 02DWe gladly ship to most countries!Email us for a QuoteEmerson / Motorola cPCI-6020 Compact PCI Host Slot Processor Board 01-W3938F 02DThis Emerson / Motorola cPCI-6020 Compact PCI Host Slot Processor Board is used and in excellent condition.Part Number: 01-W3938F 02DConfiguration: 500 MHz MCP7410 Processor 256 MB SDRAM Compact Flash Slot Emerson / Motorola cPCI-6020 Compact PCI Host Slot Processor BoardFeatures MPC7410 Processor High-Performance L2 Cache High-Performance, Low-Latency SDRAM Subsystem DMA Capability Dual 10/100BaseT Ethernet Two Async Serial Ports Two Async/Sync Serial Ports Single PMC Slot On-Board Debug Monitor With Self-Test Diagnostics Four 32-Bit Timers, Three Watchdog TimersDescriptionThe Emerson / Motorola CPCI-6020 series is a family of CompactPCI host-slot processor modules and the first host-slot modules to benefit from Emersons PowerPlus III Architecture. The CPCI-6020 provides substantial investment protection to deployed infrastructure by providing an easy upgrade and migration to state-of-the-art features and performance. Utilizing low-power, high-performance MPC7410 processors with 2MB of secondary cache, dual peripheral component interconnect (PCI) buses for the on-board peripherals and a 64-bit bridge to the CompactPCIinterface, the CPCI-6020 series packs optimum performance and functionality in a single CompactPCI slot.Product Family: cPCI6020, cPCI-6020, cPCI 6020For more information, click here to view the datasheetCPCI-6020 - ACT Technico CPCI-6020 Emerson CompactPCI Host Slot Processor BoardFeatures Dual 10/100BaseT Ethernet Four 32-bit timers, three watchdog timers Four optional USB ports (two in the front) High-performance L2 cache High-performance, low-latency SDRAM subsystem MPC7410 processor New DMA capability On-board debug monitor with self-test diagnostics PCI Enhanced IDE (EIDE) controller and floppy disk controller Single PMC slot Two async serial ports, two async/sync serial ports, keyboard and mouse Up to 2GB of ECC protected capacity Variety of persistent memory types and capacitiesSpecifications System Board Unique ID: Height: 233.4 mm (9.2 in.) Depth: 80.0 mm (3.1 in.) Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Compliance: Controller: Intel21154 Address/Data: A32/D32/D64 with parity PCI Bus Clock: 33/66 MHz, PCI 2.1 compliant Signaling: 3.3V output, input defined by VIO CPU: Processor: 500 MHz MPC7410 processor On-chip L1 Cache (I/D): 32K/32K High-Performance L2 Cache: 200 MHz parity protected, 2MB Frontside Bus: 100 MHz EIDE: TOD Clock Device: MT48T37, 32KB NVRAM Real-Time Timers/Counters: Four 32-bit programmable Watchdog Timers: Three, time-out generates reset Environment: Operating Non-operating Temperature: 0C to +55C, forced air cooling exit air -40C to +85C Humidity (NC): 10% to 80% 10% to 90% Vibration: 0.5 G RMS, 20-2000 Hz random 6.0 Gs RMS, 20-2000 Hz random Ethernet: Controller: Dual Intel82551IT Interface Speed: 10/100Mbps PCI Local bus DMA: Yes, with PCI burst Connector: One RJ-45 on front panel, one TM port RJ-45 via Jx IR Interface: Flash Capacity (bootable): 1MB via two 32-pin PLCC sockets; additional 32MB surface mount; selectable via reset vector CompactFlash: Single Type I/II memory card socket for large capacity needs (50-pin socket) Controller: W83C554 Interface: ATA, true IDE mode NVRAM: 32KB total capacity, 4KB available for user data Cell Storage Life: 50 years at 55C Cell Capacity Life: 10 years at 100% duty cycle Removable Battery: Yes SROM/Serial EEPROM: AT93C46 SROMs for Ethernet configuration; two 8KB dual-address I2C devices for vital product data (VPD) and user configuration data; separate 256 byte standard I2C serial EEPROMs (on mezzanines) for memory VPD ISA: Controller: PC97317 Configuration: EIA-574-DTE Async Baud Rate, bps max.: 38.4K EIA-232, 115Kb/s raw Connector (COM1): Front panel RJ-45, also RJ-45 on CPCI-6020-MCPTM-01 Connector (COM2): Routed to J3, 10-pin header on CPCI-6020-MCPTM-01 Keyboard/Mouse: Controller: Z85230/Z8536 Number of Ports: Two Configuration: TTL to P2 (both ports), SIM on Oscillator Clock Rate (PCLK): 10 MHz/5 MHz Connector: Routed to J3, HD-50 on CPCI-6020- MCPTM-01 Keyboard/Mouse: Controller: W83C554F Connector: Routed to J5, one 40-pin header on CPCI-6020-MCPTM-01; plus on-board CompactFlash L2 Cache : Asynchronous Serial Ports: RJ-45 labeled as COM1. Two 10/100 Mbps Ethernet ports ENET1 & ENET2. ENET1 shares with Ethernet port of CPCI-6020 on the front panel and requires custom-built option to activate it. Synchronous Serial Ports: Two (Serial 3 and Serial 4). User configurable via the installation of SIMs. Two 60-pin connectors on planar for installation of two serial interface modules. Single 50-pin external connector with Y-cable adapter. Mouse/Keyboard: 6-pin circular female mini DIN Floppy: 34-pin header EIDE: One 40-pin header L3 Cache: Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) Emerson board products are tested in a representative system to the following standards, results pending: CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 LAN: LED Indicators: Board FAIL and CPU Activity status Recessed Switches: Reset and Abort LVDS: Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors PCI Bus Clock: 33 MHz or 66 MHz Signaling: 3.3V Power: +3.3V, +5V, 12V, 7.5 watts maximum per PMC slot Module Types: Basic, single-wide, front panel I/O or J3 I/O Max Capacity: Controller: PC97317 Compatible Controllers: DP8473, 765A, N82077 Configuration: 3.5 2.88MB and 1.44MB; 5.25 Connector: Routed to J3, 34-pin header on CPCI-6020-MCPTM-01 Mini PCI: Dynamic Memory: ECC protected synchronous dynamic RAM Capacity: Up to four RAM500 mezzanines yielding 2GB maximum capacity OS: Mouse and Keyboard: Controller: PC97317 Connector: Routed to J3, 6-pin mini DIN on CPCI-6020-MCPTM-01 Power Requirement: (not including power required by PMC, PIM or SIMs) +3.3V% +5V% 12V% CPCI-6020: 2.6 A typ. 2.8 A typ. 15 mA typ. 3.5 A max. 3.75 A max. 20 mA max. SATA: All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. USB: Controller: Connectors: Two Series A receptacles on front panel, two separate ports routed to J5Don't forget to place your buy. By looking on this product you agree to the following terms:Shipping Terms:Buyer pays all shipping costs.Let us know if there is an issue with the shipping costs, as they are automatically calculated by Atomic Mall.Shipments made to California must include 8.75% sales tax unless we are provided with a valid resale certificate.We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller.The Parcel post option shown is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required.Payment Terms:Payment is to be made by PayPalPlease contact us if you have any questions about Atomic Mall's recent payment policy change.Payment is to be received within ten days of close of product.Should payment not be received within ten days the item will be re-listed and high buyder will forfeit.No personal checks will be accepted.International Terms: (These terms only apply to international shipments.)Buyer is responsible for all brokerage, customs, and or duty charges.Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.Payment must be made in US Dollars. Money must be drawn against a US bank. Warranty Terms:No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in product.What you see in the picture(s) is what you get nothing more nothing less.Test results of item(s) in product are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for.Our only guarantee is that you will receive the make and model listed in the ad.The maximum liability of Best Stuff To You is the high buy of the product.Return Terms:Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Best Stuff To You reserves the right to replace the item(s) or refund the high buy solely at our discretion. Item must be returned in the original box and packaging.buyder must request a RMA number before returning item(s). Packages returned without a RMA number will become property of Best Stuff To You ten days after receipt unless buyer has paid return shipping within the ten day period.All software and toner cartridges are sold as-is No returns.See the refund policy on the listing page or send a message for more information about our return policy.Shipping Damage Terms:Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, in some cases. Not retaining the original box and packaging may affect the carriers decision on a claim.Seller will commence filing the claim once buyer has filed the damage report with the seller. Buyer must notify seller within 48 hours of receipt of a damaged shipment.Medi