Hi all Atomic Mall ers looking
for older Motorola Batteries, chargers. Up for buy It Now here is: Motorola RLN5266A - Charger - Impres Bundle Pack - Impres Single Charger WPLN4114AR with w/2 HNN9028AR Batteries For HT1000/MTS2000 Series and Other Select Motorola Radios This set of items have been Discontinued on MOST websites. Model: Motorola RLN5266A Product Specifications: The impres smart energy system ensures maximum talk-time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features The smart energy system reconditions impres batteries when they need it, automatically, keeping them in peak condition Its advanced conditioning features allow batteries to be safely left on the charger for extended periods of time without incurring the damaging heat build-up which can rob batteries of cycle life Batteries left on the charger are kept fully charged so they are always ready when you need them The impres system reconditions batteries when they need it based on their usage pattern Talk time and cycle life are optimized and the need for manual maintenance programs reduced or eliminated This rapid-rate tri-chemistry charging system will also charge existing legacy batteries and supports multiple radio platforms including SABER, XTS, and HT 1000 series portables Note: Charges all battery types - Only "Impres" Batteries will utilize condtioning properties IMPRES BATTERY SYSTEMS Motorola s state-of-the-art IMPRES technology allows communication between the battery and the charger. The result is a radio system that s charged and ready to go whenever you need it. Automated battery maintenance - Manual tracking and recording of battery use are a thing of the past. IMPRES uses a unique communications protocol to facilitate adaptive reconditioning the charger evaluates the details of the battery s usage pattern to determine the optimal reconditioning interval. This automated process works to diminish memory effect and optimize the cycle life of the battery and maximize talk time Chargers that communicate - IMPRES multi-unit chargers are available with a two-line display module. Your customers have access to valuable information such as: Battery capacity (in mAh and percent of minimum rated capacity) and voltage while charging and at completion of charge Time remaining to complete rapid charging (NiCd and NiMH only) Current battery charge status The battery s unique serial number, part number and chemistry Knowledge is power - Now you can make informed decisions on battery replacement and asset management Environmentally friendly - IMPRES chargers have technology that avoids overcharging and our single-unit IMPRES chargers with external power supplies consume 40 percent less energy in standby mode than required by the U.S. Energy Independence and Security Act of 2007. Long-term safe charging - IMPRES batteries may be left in IMPRES chargers for extended periods without heat damage due to the charger and will be monitored so that they are charged and ready to go whenever they are needed. Support for mixed battery inventories - IMPRES chargers are compatible with non-IMPRES Motorola batteries, making the migration to all IMPRES much easier. However, automatic reconditioning and all other IMPRES features are realized only when using Motorola IMPRES batteries and chargers. Extended warranty - When used exclusively with IMPRES chargers, IMPRES batteries carry extended capacity warranties that continue six months longer than Motorola Premium battery warranties. Proven tough - IMPRES batteries are subjected to the same rigorous testing and held to the same high standards as all Motorola Premium batteries. Actual results of Drop, Vibration and ESD (Electrostatic Discharge) tests prove that Motorola batteries outperform the competition. IMPRES FACTS: IMPRES products are smarter because they talk" to each other Motorola s industry-exclusive IMPRES technology allows communication between the charger and the battery, which enables automated battery reconditioning, display of critical charging information and other key benefits. IMPRES batteries have a memory chip that stores all usage information, which can then be accessed and evaluated by any IMPRES charger. IMPRES chargers have built-in reconditioning capability that is automatically utilized any time an IMPRES battery requiring maintenance is inserted. IMPRES chargers perform adaptive reconditioning Before the availability of IMPRES chargers with automatic, adaptive reconditioning, battery maintenance technicians had to guess at the correct reconditioning intervals. Reconditioning too often wasted battery cycles; not reconditioning often enough resulted in diminished battery performance. IMPRES has changed all that. IMPRES chargers evaluate the actual usage pattern of every battery to establish the optimal reconditioning interval. IMPRES offers long-term safe charging Most conventional chargers transition to a maintenance charge mode at the completion of a charge cycle. Maintenance charge is constant power applied to a battery in an effort to keep it charged over time. This results in long-term heating that can damage a battery, resulting in lost capacity. IMPRES chargers automatically turn off at the end of a charge cycle yet continue to electronically monitor IMPRES batteries every 5 minutes to determine when more energy should be applied to the battery. This process assures that the battery maintains a very high state of charge without sustaining heat damage due to the charger. Fully charged doesn t mean full battery capacity Most conventional chargers have an LED to indicate charge status. Red indicates charging and green indicates charge complete. But what does charge complete really mean? The charger is saying that it did the best it could given the condition of the battery and it is done. However, the resulting battery capacity could be far less than the original stated capacity for an old or defective battery, yet the user has no way of knowing that with only an LED indication. IMPRES chargers with displays provide the actual charge capacity of the battery, so you ll know exactly how much usage you will get from each battery. IMPRES charger LED indicators give additional information IMPRES chargers have additional LED indication capability to supply you with even more information during a charge cycle. The alternating red/green LED indicates batteries have fallen below a certain capacity threshold (typically less than 60% of rated minimum capacity). An IMPRES battery exhibiting a red/green indication is not defective it has simply reached a capacity level that may limit its usage. MYTH Competitive batteries are IMPRES compatible Competitive battery manufacturers often claim to be IMPRES compatible." While it may be true that some competitive batteries can be charged in IMPRES chargers, there are still significant limitations and concerns. The communication between an IMPRES battery and IMPRES charger that enables automatic reconditioning, display of IMPRES data on display chargers and other IMPRES features is a Motorola exclusive technology and will only occur with the combination of IMPRES batteries and IMPRES chargers. Motorola does not test the charge compatibility or safety of competitive batteries in IMPRES chargers. In the OPEN box: Batteries (2) - HNN9028AR Impres Intelligent Batteries - still in their boxes. Charger Base - WPLN4114AR - still in the plastic. AC Adapter - Multi-language - users guide about 12 pages for each language Please see all photos, thay show exactly what this item looks like and the pics shown are of the actual item you will be recieving. The 2nd like item is in like condition. as stated above. is Regular 1st class USPS Mail Please ask any questions you may have....................Thanks for looking...........................Thank You in advance for your business.