Login to enter your own
review of this item.
Center total is the Seller's overall score, averaged from each active component:
Atomic Mall Feedback: Imported Feedback: Order Fulfillment Rate: |
100.0 99.8 100 | |
Trophies Earned |
WHY PAY MORE
REPLACEMENT Gas Struts, Springs, Shocks for many of the Mustang billet hood hinge kits (Steel Hoods)
May work for Mercury Cougar - Comet, Ford Fairlane - Falcon and others
As the set includes 8ea ... Metal end fittings (4ea ... 18mm length and 4ea ... 20mm) this allows for 3 different strut lengths (Approximately... 7, 7 1/8, 7 1/4 inch depending on the end fitting combination) PLEASE be sure what length you are using (they are measured center to center of the ball sockets) ... these are 170lb (756 Newtons) output
This listing is for a SET ... 2ea struts
MORE Gas springs listed in our Store
. Fully extended ... 7 to 7 1/4 inches (depending on the end fitting used)
Fully retracted ... 5 1/16 to 5 5/16 inches (depending on the end fitting used)
Stroke = 2 1/16 inch (2.0625)
Diameter rod = 10mm / tube = 22mm
10mm Metal Locking end fittings
End Thread = M8 x 1.25
170 pound force at rest (full extension)
You are bidding / buying (2ea) gas spring / shock / strut Manufactured for Nitro-Prop Strut and Spring (NP SP7-779-170) this unit is totally self-contained, hermetically-sealed, a hydro pneumatic linear actuator containing pressurized nitrogen gas, which provides the output force.
This set comes complete with 8ea threaded removable 10mm STEEL locking ball sockets for both the rod and tube ends (if you are in need of mounting brackets or ball studs see our selection listed in the store)
TIP: there are several different styles of these aftermarket hinges being manufactured today; to be sure you are getting the correct replacement measure (Open and Closed length as well as output pressure) of your old strut (again center to center of the ball sockets) as they can be a tight fit depending on your brand of hinge. Also most hinges have 10mm end fittings, but I have seen 13mm fittings being used as well be sure to check your old ones. The output pressure per strut is 170lb (be sure this is what you want) ... You are always welcome to e-mail or call us when in doubt of what you need
The shipping and handling is a set cost of $10.90 (postage + partial packing cost) for the first lot and 3.00 for each additional (multiple items may be shipped USPS or FedEx depending weight and destination) We ship to the USA only
Thanks for looking!