1200 watt Active Speaker System 18

8" Subwoofer and 2x12" Satellites Suggested Applications Mobile DJ ??? Karaoke ??? Nightclub, Restaurant, Bar Installation ??? Corporate Audio / Video n Home Entertainment System ??? Live Sound System ??? Stage Monitoring System ??? Booth Monitoring System n Drum Monitoring The MATRIX 2000 is a complete sound reinforcement solution consisting of two 12??? two-way speakers and an 18??? subwoofer, equipped with a built-in 1200-watt three-channel amplifier. The three-channel amplifier houses all the electronics required to run the system including electronic crossovers, equalization and compressors. The electronic circuity is fine tuned to match all of the components for the best possible sound. The MATRIX 2000 is designed for easy operation, as you do not need to tweak frequencies or finesse levels. To set-up the system???s components, simply connect the XLR right and left signal cables, speaker cables and power cord and you???re ready to go! BUILT-IN 3-CHANNEL AMPLIFIER The 18??? subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the cast-framed, 4??? voice coil, 18??? subwoofer. The rear chamber houses all of the system???s electronic circuitry, which includes the amplification for all three components, power supply, compressor and preamps. The 18??? subwoofer has a power handling capability of 600 watts and a nominal impedance of 8 ohms. 12??? TWO-WAY SPEAKERS: The 12??? two-way speakers are loaded with B-52 custom designed 12??? loudspeakers and 1" titanium diaphragm compression drivers, mounted to 900 x 400 constant directivity horns. The speakers are designed to be pole mounted, sit as stage monitors and have built-in (3/8??? ??? 16 TPI) flying hardware for permanent installations. The front panel of the two-way speakers are convex so as to fit perfectly on to the subwoofer???s front grille. Each two-way speaker has the power handling capability of 300 watts and a nominal impedance of 4 ohms. TRANPORTING THE SYSTEM: Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer???s front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet. Amplifier Specifications Subwoofer Power Output: 12??? Two-Way Power Output: Line in: Parallel Out: Speaker Outs: Power Requirement: 600 W 8 Ohms 2 x 300 W 4 Ohms XLR Female XLR Male Speakon Connector 115V<>50/60Hz<>10A 230V<>50/60Hz<>5A 12" Two-Way Specifications Speaker Input: Loudspeaker: Compression Driver: HF Dispersion: Nominal Impedance: Active Freq. Response: X-over Freq. (passive): Maximum SPL: Weight: Dimensions (Upright): Speakon style connector 12??? Custom Built B-52 Transducer 1??? Exit Titanium Diaphragm on Constant Directivity Horn 90?? x 40?? 4 Ohms 120 ??? 20K Hz 1.6K Hz 12 dB/Octave 126 dB 40 lbs. 23??? (H) x 14??? (W) x 13??? (D) 18" Subwoofer Specifications Loudspeaker: Nominal Impedance: Subwoofer Freq. Response: Max. SPL: Active Crossover: Subsonic filter: Weight: Dimensions (Transport): 1 x 18??? Cast-Framed, 4??? Voice Coil Custom Subwoofer 8 Ohms 30 ??? 120 Hz 129 dB 120 Hz 24 dB/Octave 30 Hz 160 lbs. 30??? (H) x 28??? (W) x 23??? (D)

B-52 MATRIX 2000 Powered Speaker System

# 1224874
b 52 matrix 2000 powered speaker system



Brand New
Not Available
Not Available

24 hours
USA Lower 48
Bakersfield, Ca

K.A.D. SALES is not available for Chat